|
|
JetClamp punchholders for press brakes Promecam - EURO
JetClamp punchholders are used for the manual (mechanical) quick fixation of top tools (punches) for Promecam - EURO system. Our punchholder is the best possibility for appreciable reduction of the time of the operator when it is necessary to replace or adjust the bending tooling.
These punchholders could be installed to every press brake new or used with the replacement of all standard punchholders or partially.
The use of quick change punchholders is actual with the flexible and changeable production and use of multistep programs and sectional tooling.
Fixation is solely mechanical without any pneumatic or hydraulic systems.
JetClamp punchholders are used with 3 conditions:
1 - closed completely, fixed punch;
2 - half-opened for lateral change of tooling;
3 - 90 degrees opening for front change of tooling from the bottom.
Main details
150 or 200 mm width
Intermediates H100 (Schiavi execution), H120 (Amada execution)
Single or double (including back positioning) clamping
Effective fixation even for 10 mm section punches
Nickel plating of components
Mechanical lock, no any connection necessary
Ergonomic design and long life use
No need of special force, light movement and fixation
Use with every press brake with bending tools of Promecam system
Additional
Attention: All the brands, machines, manufacturers and trademarks are used only for the information, are not connected with PRECITOOLS and are property of their respected owners.
|
|
|